If white color can be presented as a sum of all colors, then black is kind of like a lack of color. However, this color is not very important in the interior. Every evening we go back to night with pleasure to rejuvenate our strength. It is this color that gives the beginning to everything new. Black color is indispensable for contrast accentuation and separation of other colors, giving them brightness and expressiveness. It makes the interior graphic and clear as well as very stylish. Composition Wallboard. Composition wallboard usually presents no particular painting difficulties if the ordinary precautions are observed, such as making certain that the surface is dry and free from grease and oil. The painting procedure for wallboard is the same as for plaster; it requires a priming and sealing coat followed by whatever finishes coats are desired, or may be given one-coat flat or resin-emulsion type paint. What are the major color fields in the painting and their role in the entire composition? Is the light optically realistic or expressive as in Matisse's painting?
Airless Tip: If you have somebody who can start masking off the trim, have them start on that while you convert the airless to a new color. When changing colors with an airless paint sprayer it is a good idea to have a second bucket filled half way with clean water. Place the intake hose in the clean water gently without getting the old color everywhere in the water. Take the tip out of the airless and spray all of the old paint out of the hose and back into its original paint bucket. Be careful when doing this that you recognize when the paint starts turning watery. When it does point the gun into the first bucket and spray until it looks pretty clean. It doesn't need to be perfectly clean. When it looks good, clean off the intake line in the clean bucket and get the old color off the intake line. Now place the intake line inside of your new trim paint. What emotions does it produce? Once you figure out which position is prime and which position is spray, place the valve in the prime position and grab the primer hose. Point the primer hose in the empty bucket near the top and at an aproxx.45 degree angle from the side (the reason for this is that there is likely to be pressure still built up in the airless and when you first switch on the airless to prime it, paint will likely burst out of the primer hose and you don't want to have it go everywhere). Now turn the airless paint sprayer on and you will see that the airless is sucking up the new paint and pumping out the primer hose. At first you will typically see a cleaning solution come out followed by your paint. When you see your paint coming out switch over the primer valve to the other position and you will see the airless pumping paint into the main hose. Step four: the key to a finished looking painting is to build it just like a house...and by that I mean layers. Paint it in the reverse order in which the eye sees it to make it three-dimensional. By this I mean paint what's farthest from the eye first, and build layer upon layer towards the eye. In other words, do the background first because it should be the farthest from the eye, then add the objects on top of that, and then add the shadows to complete the look. Ultimately it's common sense. If you paint a bowl of fruit, the bowl and fruit need to sit on top of that background, much as it would in real life.