Paste and powder paints should be mixed in quantities sufficient for immediate use only, as these materials often become unfit for application if allowed to stand for three or more hours.
Building a monochromatic theme simply uses a single color in graduating shades like cream, beige and brown. It is hard to go wrong with this color palette, so everyone can use it successfully. But unless variations of the one color used are handled with flair, this can be an unexciting look.
Valspar Paint, for instance, also produces paint branded as Laura Ashley, Eddie Bauer, Waverly, and more. These separate lines, or collections, have their own color wheel displays and are usually available wherever the primary brand, Valspar in this case, are sold. Other examples are Disney Paints, currently produced by Behr, and Ralph Lauren and Martha Stewart, formerly produced by Sherwin Williams.
Analyze your existing paint. The first step before determining if a budget paint job will work on your Mustang is to assess the current condition of the paint. In many cases you can prep and paint directly over an existing paint job, but only if it's in solid shape.
Our next step is mixing the oil paint. DO NOT SKIP THIS STEP. Obviously you will need to buy some paint thinner, but the most important product you will need is Penetrol $12. Take a plastic quart cup that you will be painting out of and fill it up about three quarters with paint. Now mix in a couple of tablespoons of Penetrol and the slightest amount of thinner. Mix it up with a stick real good and you are ready to go. Why Penetrol? This product is the key to a fantastic looking job. Penetrol will not only smooth out the finish it will extend the time (usually about 20 minutes) before the paint starts to get sticky. This will allow you to apply a glass like finish and eliminate brush marks. We are going to apply two coats here as well so don't glob on the paint. When you are painting the door frames get used to the paint and watch your drips. After about ten minutes or so you will get used to how the paint flows and how damn good your finish looks. Allow to dry overnight before apply second coat. Tip: after you apply the second coat remove the tape and don't allow to dry first. You will get a little paint on your hands from the tape, but deal with it. By removing the tape now you will ensure crisp lines. In some case when you allow the second coat to dry you will pull a bit of the oil paint off. It is not common, but in my opinion why take the chance.
However, if you put a coat of pure white primer (which has a score of 0) on top of the brown color wall first, this immediately brings your luminosity score down to 4 (8 + 0 = 8/2 = 4, the average). This means you may only need one coat of yellow paint to give you the right hue and saturation. In reality of course, you will always want to do at least 2 coats. But even with a total of 3 coats (primer and paint) you are way ahead of the paint-only option.
THE LIGHT AND COLOR. The light and color in the painting will always be dictated by the artist's intention, the concept of the painting. So, consider the sources of color, the time of the day, the emotional impact of light and shades.