If you have a vinyl top then remove the molding separating the vinyl and paint. Drip rail chrome really should be removed also, but can be extremely hard to take off undamaged. If you plan on buying all new drip molding then definitely remove the old for painting. But if you want to keep the originals then it might be better to leave them on and let the painter mask around. If you have hub caps it's easy to just take them off. While the paint shop should completely mask all four tires, overspray can still find its way in. It's sometimes better to play it safe and just remove wheel covers.
When spraying your house, it is a good rule of thumb to spray in the direction of the grain of the material. So if you have siding that runs horizontal, you want to spray in a horizontal style. Also, when you go to spray, the gun should be approximately 12" from the material that you are spraying. Do not pull the handle to spray with your hand still. This will spray a lot of paint in one spot causing it to drip. So have your hand moving when you go to depress the handle. This will give you an even look to your paint.
Paint & Paper Library arranges its colours in five shades from light to dark to help select coordinating colours for ceilings, cornices, walls, doors and woodwork. If you are decorating around bold furnishings, such as a sofa or curtains, look at paint colours from the same fabric house as they are most likely to be sympathetic.
Amateur house painters never had as much help as today. Scores of new paints and equipment placed on the market in the last few years make it possible for the weekend handyman to paint his own house almost as easily as a professional. From one-coat paints to disposable blowtorches, everything has been designed to make the job go faster, look better and cost less.
Technical advancements are constantly being made to improve the life span, durability, wear and performance of exterior paints. The Akrylatfarg range at Ray Munn, for example, is an environmentally sound water-based option.
Interior paints are used to obtain pleasing decorative effects, improve sanitary conditions, and insure better lighting. These paints may be divided into four types: wall primers; one-coat flats; flat, semigloss, and gloss; and water paints.
However, if you put a coat of pure white primer (which has a score of 0) on top of the brown color wall first, this immediately brings your luminosity score down to 4 (8 + 0 = 8/2 = 4, the average). This means you may only need one coat of yellow paint to give you the right hue and saturation. In reality of course, you will always want to do at least 2 coats. But even with a total of 3 coats (primer and paint) you are way ahead of the paint-only option.