Stripping all the chrome. One of the single most important steps in saving money on a paint job is to strip your Mustang as much as possible yourself. This means taking off anything and everything that won't be painted. The more you take off the less the painter has to mask around. Masking not only takes their time (which costs you money) but it also results in areas that simply can't get a full coat of paint. If you take everything off, then the painters can simply scuff and spray, which will give you better and more consistent coverage.
Hiding power comes from the paint's pigment and is affected by the manner and thickness of the application. Color retention is the ability to maintain its original color during exposure to sunlight, etc. Chalking resistance prevents the white chalky powder from forming on the surface and lightening the color of the paint. Chalking occur over a period of time. Blister resistance keeps excessive moisture from coming through the substrate and affecting the paint layer. Tip: if paint is applied over a damp or wet surface, blistering is imminent.
The most challenging question and statement a stylist or colorist can receive is: Can you correct this hair color I applied at home? It looks terrible! I personally love doing corrective hair coloring. A lot of hair stylist do not like this area of our field. Be sure your stylist has plenty of experience in this area of hair coloring if you need this service rendered. I really won't go too in depth here about corrective hair coloring, accept that, usually a botched at home color can be corrected with the following: Time at the salon for the correction. Money, as this service can be expensive. Cooperation with, and trust in, the hair stylist's or hair colorist's judgment.
What colors are prevailing - tonal or local, warm or cold?
What emotions does it produce?
Now that you have primed the airless, make sure that there isn't a tip in the gun of the airless and bring it over to the empty bucket. Since there is typically cleaning solution in the hose leading to the gun it is a good idea to spray that out until you see thick paint coming out. Once you have thick paint coming out you may put your tip back in. Remember that the tip will have an arrow on one side of the handle that shows which direction it must be in, in order to spray.
For stippling you need a special brush; get one that is flat, and has short, stiff bristles.