Flat or Dead-Flat Oil - Provides a completely flat, oil-based finish. Generally used on walls but not suitable for areas of high wear.
Hope this helps you in deciding complete exterior paint job, or partial trim only exterior paint job, saving painting costs when you can, from your local area painting contractor.
Special Surfaces. WHITEWASH. Whitewashes and lime paints must be thin when applied. In fact, best results will be obtained if the application is so thin that the surface to which it is applied may easily be seen through the film while it is wet. The coating will dry opaque, but two thin Coats will give better results than one thick coat.
Changing Colors. If you're keeping your Mustang the same color it is now then things stay pretty simple. Areas like the door jambs and inside of the trunk are probably still in good shape since they aren't exposed to the weather and you won't have to worry about repainting them. But if you're changing colors these extra areas will cost you. Be sure the price quote you get from the paint shop includes these extra areas. If you wait until the day you pull up with your Mustang prepped for paint you could be surprised by this extra cost.
Following a European directive, the British paint industry has reduced VOCs in two stages, the second of which came into force in January last year.
SECONDARY COLORS. When you mix two primary colors together, you get a secondary color. The secondary colors are orange, green and violet. Orange is made by mixing red with yellow. Green is made by mixing blue and yellow. Violet is made my mixing blue with red.
Suppose it rains while you're working? Vinyl paint dries fast - as quickly as 10 to 30 minutes - and will withstand a shower after that time. It takes another 12 hours to "cure," by then forming an exceptionally tough, long-lasting film that stands up well against weather, sun, salt air and factory smoke.