You can use vinyl on almost any exterior except previously painted wood. It works fine on wood shingles and shakes, asbestos shingles, brick, stucco, concrete and masonry blocks. One manufacturer says you can even put it on wood clapboard if the clapboard is new and unprimed. Water-thinned rubber-latex paint is already an old reliable, though it is only about 10 years old. It accounts for a big percentage of all paint sold and is still the most widely available of the easy-to-use finishes. One new type is a combination vinyl-rubber paint that is said to do a better job on interiors than either vinyl or rubber alone because it dries faster, lasts longer and has less sheen. Color - The paint makers are out to sell the lady of the house and color is their come-on. They are tempting her with a kaleidoscope's variety; one firm offers more than 6,000 different shades.
In conclusion, this article has really just been a "Painting 101" exercise. I'll be adding more articles on the subject once you get more advanced. It's so rewarding to those who stick with it. My work now sells around the world online. So I'm glad I'm glad I stuck with it. It's been infinitely good to me, I've met the most interesting people....including Madonna! And I am so glad I get to do what I want And ultimately it's so gratifying to leave expressions of myself behind forever. And if the owners then turn around and sell my paintings for a fortune later, then that's the cherry on top for me. I feel lucky to have found my calling. And I hope you find it too. And I hope that every single time you view one of my paintings it brings you a little bit of the amazing joy it brought me when I was creating it. Mixing. Paste paints, such as aluminum, resin-emulsion, and lead-in-oil, should be stirred with a stiff paddle and reduced to painting consistency with the liquids recommended on the manufacturer's labels. However, if you put a coat of pure white primer (which has a score of 0) on top of the brown color wall first, this immediately brings your luminosity score down to 4 (8 + 0 = 8/2 = 4, the average). This means you may only need one coat of yellow paint to give you the right hue and saturation. In reality of course, you will always want to do at least 2 coats. But even with a total of 3 coats (primer and paint) you are way ahead of the paint-only option. The first thing you need to do is clean your baseboards, doors, and wood work with a damp rag. Yes, your baseboards are that dirty. Now comes the time consuming process of taping off. This is a step that is skipped by most do it your self people and let me tell you it shows. Like I mentioned before a paint job is only as good as the straightness off it's lines don't cheat yourself here. Buy low stick professional painters tape and allow the walls to properly dry before you apply. Take your time as this process cannot be rushed through, but will give professional looking results. If you have carpet use 2 inch regular painters tape and tuck it in real good where the carpet meets the baseboard. Remove door hardware it takes two seconds and failure to do so will only slow you down in the long run. Open the windows and break out any fans as painting with oil based paint comes with paint fumes.