When spraying your house, it is a good rule of thumb to spray in the direction of the grain of the material. So if you have siding that runs horizontal, you want to spray in a horizontal style. Also, when you go to spray, the gun should be approximately 12" from the material that you are spraying. Do not pull the handle to spray with your hand still. This will spray a lot of paint in one spot causing it to drip. So have your hand moving when you go to depress the handle. This will give you an even look to your paint. Note: How to use an airless paint sprayer. I'm sure the guy at the rental store showed you how to use the airless (typically with his limited experience of actually painting a house), so hopefully I can offer you a couple new ideas on how to paint your home using an airless paint sprayer. When you first get the airless home, set it in the middle of the area that you would like to start painting. Typically the length of the hose is around 50'. Stretch out the hose prior to painting so that you don't have to worry about unraveling it while you are painting on a ladder. It is a good idea to have a 100' extension cord so that you can bring the airless anywhere you wish to paint without any restrictions. Tip: before you plug in the airless into the extension cord, MAKE SURE THE AIRLESS IS OFF! You don't want the airless to start pumping without paint! Now, when you go to set up the airless, before you turn it on, it's a good rule of thumb to have a second empty bucket next to your bucket of paint. I'll explain why in a second. Place both buckets side by side and place the intake hose (with the wire mesh filter end) into your 5 gallon bucket of paint while the primer hose (usually a lot smaller, about the size of a pencil'ish) is placed in the empty bucket of paint. Before you turn on the machine make sure that the airless is set to prime the machine first. There is a primer valve that you can rotate between prime and paint. A good way to see if the valve is set to prime or paint is to try this little test prior to turning the machine on. While turning the valve clockwise a couple times you will notice that the valve handle will separate from the machine in one position (leaving a slight crack between the valve and machine) while the other position the valve is close to the machine. The position in which the valve is separated from the machine is considered the primer position. Do this multiple times to see what I'm talking about. Don't worry if you keep on spinning the valve, you can spin it a million times in one direction and it won't hurt it. Like this, it will actually take quite a while to reach a number that is close enough to the yellow color you've chosen that you can't tell any difference (and mathematically, you will never actually reach an average of 4!)
Blue Dogs and the Legend of Loup Garou. In 1992, George Rodrigue, a Cajun artist from New Iberia, Louisiana, painted a series of paintings called The Blue Dog Pictures which were made popular by an advertising campaign done by Absolute Vodka. The blue dog has popped up in numerous other venues since then, but it wasn't created for commercial purposes. Rodrigue based his paintings on the Cajun legend of Loup Garou, the werewolf that is said to haunt the swamplands surrounding Acadiana and New Orleans. Parents teach their children morality lessons using the character and the commercial use of the blue dog has softened its image, but both Cajun and ancient American Indians still declare there's a factual basis for the story. Is there a werewolf in the bayou? Play develops through fairly standard stages and each stage is a necessary precursor for the next. These stages provide the key foundations for our children to become well-prepared to cope with the physical, cognitive, emotional and social demands of formal schooling. Rushing children through the different stages, does not mean they achieve school readiness quicker; it means they lose out on the developmental window to develop strongest foundations. Do all your own body work . As mentioned earlier, the key to keeping your paint shop costs down is to do as much as possible before you take it to the shop. This includes body work, if you've got the skill, or the patience to learn the skill. Bodywork is time consuming. It requires several steps that must be done in the correct order, with the correct curing times in between. Shortcuts here will show up like a sore thumb in your new paint job, so don't be tempted. If you don't have the skill to tackle the body work yourself then it's smarter to let the paint shop do it. Just understand that this raises the cost of your paint job significantly. Good body work takes hours upon hours and having a professional do it can easily exceed the cost of a cheap paint job. If you didn't do all your own body work be sure to get a clear price quote from the shop on how much time and money it will cost them to do the repairs. Remember, this can add up quickly, so if you can do the work yourself it's better on your wallet. Finally, discuss timing. Most high volume shops will want you in and out in a few days.