Hiding power comes from the paint's pigment and is affected by the manner and thickness of the application. Color retention is the ability to maintain its original color during exposure to sunlight, etc. Chalking resistance prevents the white chalky powder from forming on the surface and lightening the color of the paint. Chalking occur over a period of time. Blister resistance keeps excessive moisture from coming through the substrate and affecting the paint layer. Tip: if paint is applied over a damp or wet surface, blistering is imminent.
Obviously, when mistakes like this occur paint companies have nothing to lose. Whenever people pick paint colors that they are unhappy with, the paint company does not have to refund the customers' money. In fact, no paint brand in the country will allow you to return paint once you have purchased it. Even better (for the paint company), since the customer is unhappy with the paint color they chose, they are probably just going to buy a whole new batch of paints!
Basically what you're looking for is a good, solid foundation of existing paint that is stable and still strongly bonded to the car. Many times an original factory paint job, even after decades will meet these criteria.
Definitely good inside the house is a new vinyl primer-sealer to be used as a base coat under any paint. It dries in as little as 30 minutes.
Selecting a Shop. You should always get quotes from at least 2-3 different shops near you. This will give you a chance to not only compare prices, but to also check out the quality of work each shop has done. Ask to see cars they've just painted. Look for orange peel or excessive overspray. Do they mostly do insurance work or do they paint entire cars also? What types of cars are they working on? A shop that sprays nothing but old beaters probably doesn't inspire as much confidence as one that does insurance work for the local Lexus or Mercedes dealer.
PRIMARY COLORS. The primary colors are red, yellow and blue. These colors are your base colors from which all other colors come from.
If a desired shade is not obtainable in custom-or ready-mixed paints, white paints may be tinted with colors-in-oil. To do this, mix the color-in-oil with a small amount of turpentine or mineral spirits and stir this into the white paint, a little at a time. If a blended color is desired, more than one color may be added, such as a chrome green and chrome yellow pigments to produce a lettuce green shade.