Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel.
When it comes to rolling out the walls never ever use a cheap foam roller. Foam rollers never evenly absorb the paint out of the pan and will actually add time to you project and cause more mess. Buy yourself a synthetic professional 3/8 nap roller head for about $6 to $8. Not only will the paint be applied in a smoother fashion you will experience less work and mess.
Social skills: Play gives children practice in the art of compromise. You will often hear children in imaginative play, arguing and debating about who gets which role or how the role ought to be played and if it's acceptable to behave in that way in a particular role. They are experimenting with and trying to understand the social rules of their world. They also learn to share and to take turns and to help each other.
Either edge of trim is painted with body color, and is where caulking is applied at most 90 degree angles. Painting trim only, cannot feasibly include caulking, as this fails and opens up over time. Most homes need new caulking when painting the exterior, and a close inspection can determine.
Reading also needs good visual perceptual skills. Shape perception allows us to recognise the similarities and differences in the shape of letters. Figure-ground perception is needed to be able to see the separate words on the page and the separate letters in the words. Spatial perception allows us to see where one word starts and another ends and which way round a letter must face.
Special Surfaces. WHITEWASH. Whitewashes and lime paints must be thin when applied. In fact, best results will be obtained if the application is so thin that the surface to which it is applied may easily be seen through the film while it is wet. The coating will dry opaque, but two thin Coats will give better results than one thick coat.
And, its never been more important to know your colors. Why? Because color is back in a big way! Just look at the vast variety of colors in the department stores.