Hiding power comes from the paint's pigment and is affected by the manner and thickness of the application. Color retention is the ability to maintain its original color during exposure to sunlight, etc. Chalking resistance prevents the white chalky powder from forming on the surface and lightening the color of the paint. Chalking occur over a period of time. Blister resistance keeps excessive moisture from coming through the substrate and affecting the paint layer. Tip: if paint is applied over a damp or wet surface, blistering is imminent.
Cheaper then doing it yourself. Some would argue that if you're going to all the trouble to fully prep the car yourself, then why not just shoot the paint as well? Why get a shop involved? The answer is simply that you'll get a better job and for less money. Some would argue with this, but the fact is that if you've never sprayed a car before then your first car will have a steep, and expensive learning curve. Laying down an even, consistent coat of paint takes considerable practice. Also, paint and equipment is not cheap. You'll need to buy primer, color coat, clear coat, reducers & catalysts. None of these are inexpensive and you can easily spend as much in paint materials alone as the cheapest paint job at Maaco or similar shop.
Limewash - Made from slaked lime and water, this paint is good for porous surfaces such as brickwork, render and plaster and gives a chalky finish. It is available from specialist companies.
INTERIOR PAINTING. If you want to alter your room's ambience, painting it is a great option. When interior painting, use paints that are quicker to dry and does not have a strong odor that lingers around where your kids can smell it.
Play develops through fairly standard stages and each stage is a necessary precursor for the next. These stages provide the key foundations for our children to become well-prepared to cope with the physical, cognitive, emotional and social demands of formal schooling. Rushing children through the different stages, does not mean they achieve school readiness quicker; it means they lose out on the developmental window to develop strongest foundations.
A flat, semi-gloss, or high-gloss finish may be applied to the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coat. For a semi-gloss finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss finish, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat.
On the other hand, in some cases there are legitimate reasons for one area to be bad even if the rest of the paint is solid. If poor body work or rust repair was done in the past then maybe just that section of paint will need to be removed.