One precaution: You can't paint with it in cold weather. The chemical reaction that transforms the water solution into a durable finish will not take place if the temperature is below 50°. (Conventional oil paints don't stick well in cold weather, either.)
Painting trim is normally done by roller and brush, not sprayed, so more manual labor is required painting trim, and most cases costing 60% of the total exterior painting job.
Are the contours rough or concealed?
Miniature paintings are executed on a very small scale on perishable material such as paper and cloth. The Palas of Bengal were the pioneers of miniature painting in India. The art of miniature painting reached its glory during the Mughal period. The tradition of miniature paintings was carried forward by the painters of different Rajasthani schools of painting like the Bundi, Kishangarh, Jaipur, Marwar and Mewar. The Ragamala paintings also belong to this school.
A large whitewash brush is best for applying the wash. One should not attempt to brush out the coating, as in applying oil paint, but simply spread the whitewash on as evenly and quickly as possible.
For localities where such conditions exist, self-cleaning paints should be selected. These paints are usually so designated on the label. Concrete, plaster, and metal surfaces each present special problems in painting. For instance, paint for use on masonry or new plaster must be resistant to dampness and alkalies, and paints used on steel must have rust-inhibitive properties.
PAINTING YOUR CEILING TIPS. · If you are painting the entire room, it is best to paint the ceiling first! · If you are using a paint roller, maneuver your arms in series of diagonal swaths (forming a letter M). Fill in the open areas by cross rolling. · If you are using a paintbrush, apply the paint in short strokes towards the unpainted area, known as "wet to dry." Then brush back into the area you just painted for a smooth surface. · If you are painting your ceiling, remove light bulbs, chandeliers, fluorescent lights and fixture covers. · Paint trim first, including edging around the ceiling, molding, and trim.