Special Surfaces. WHITEWASH. Whitewashes and lime paints must be thin when applied. In fact, best results will be obtained if the application is so thin that the surface to which it is applied may easily be seen through the film while it is wet. The coating will dry opaque, but two thin Coats will give better results than one thick coat. The reasoning here is simple. Every color in the visible spectrum can be assigned a number based on a luminosity scale (a scale from light to dark) from 0 to 9 where white is 0 and black is 9. Now suppose that the brown you are trying to cover has a score of 8, and the yellow paint you want to apply has a 4. Airless Tip: If you have somebody who can start masking off the trim, have them start on that while you convert the airless to a new color. When changing colors with an airless paint sprayer it is a good idea to have a second bucket filled half way with clean water. Place the intake hose in the clean water gently without getting the old color everywhere in the water. Take the tip out of the airless and spray all of the old paint out of the hose and back into its original paint bucket. Be careful when doing this that you recognize when the paint starts turning watery. When it does point the gun into the first bucket and spray until it looks pretty clean. It doesn't need to be perfectly clean. When it looks good, clean off the intake line in the clean bucket and get the old color off the intake line. Now place the intake line inside of your new trim paint.
If you are going to paint your home and have decided to do it yourself take a little extra time and spend a bit more money to do it right. Colors are subjective, but the quality of materials and painting tools are not. For this example we are going to go through the process of painting the interior of a typical home. In just about every paint job I did I insisted that customers used an oil based paint on woodwork and doors. Not only does oil paint make wood look and feel better it gives you a superior durable and washable finish that water based latex paint can't. There is nothing worse than seeing a newly painted door or frame ruined by fingerprints and other marks. Paint Selection. Most paints are purchased ready-mixed but, in their selection, consideration should be given to the fact that surfaces vary in their adaptability to paint and atmospheric or other conditions having an adverse effect on paint performance. In addition to the normal weathering action of sun and rain, outside house paints are sometimes exposed to other attacking elements, such as corrosive fumes from factories or excessive amounts of wind-driven dust. Another popular color wheel called the Munsell color wheel, is slightly more involved. Instead of 6 basic colors, the Munsell wheel consists of ten colors: red, yellow-red, yellow, yellow-green, green, blue-green, blue, blue-violet, red-violet and violet. For localities where such conditions exist, self-cleaning paints should be selected. These paints are usually so designated on the label. Concrete, plaster, and metal surfaces each present special problems in painting. For instance, paint for use on masonry or new plaster must be resistant to dampness and alkalies, and paints used on steel must have rust-inhibitive properties.