Special Surfaces. WHITEWASH. Whitewashes and lime paints must be thin when applied. In fact, best results will be obtained if the application is so thin that the surface to which it is applied may easily be seen through the film while it is wet. The coating will dry opaque, but two thin Coats will give better results than one thick coat.
Don't ask friends to help you paint. Basically, you are asking them to give up their day off to save you money. You don't want to be first on the list when your painting buddy hits you up to help him move do you?
Materials and their application, every paint manufacturers paint will vary. If you are freshening up old walls and painting back to the existing color, the product doesn't have to be high end or have good coverage. If you need to paint a dark color over light color or light color over dark, you may want to consider purchasing a top quality paint to avoid multiple coats. I suggest Valspar, Pittsburgh or Benjamin Moore top of the line wall paint. These brands work well for straight out of the bucket use and are application friendly. Sherwin Williams is not my first choice because the coverage is poor and you will have to apply multiple coats but, it does apply, fluently. If you find a product does not apply well, maybe it is to heavy and/or sagging on the wall, you may need to thin the paint with a little water, this will reduce the coverage but make the paint flow better and lay down nicer on the surface. I do recommend latex paints for all applications, these days a good high end latex is as good as oil paint and your tools clean up much easier, it will also be less harsh on the respiratory system. The only situation I recommend oil paint, is as a primer/stain blocker over stains that "bleed" through the paint. You can get a stain blocking oil primer in a convenient spray can and spot prime any trouble areas before painting and in the case you need to prime all of the wall due to smoke or water damage, I recommend getting it in gallons and rolling it on where the stains are present. Don't forget proper ventilation and/or a respirator when using the oil based primers!
Technical advancements are constantly being made to improve the life span, durability, wear and performance of exterior paints. The Akrylatfarg range at Ray Munn, for example, is an environmentally sound water-based option.
So lets start with Warm and Cool. When thinking about Warm, think about a desert panorama of gold, brown and earth tones. When thinking about Cool think of colors in the artic such as gray, black, white or think of the deep blue sea such as deep blues, blue greens and turquoise. Everyone can wear just about any color, the difference is in the shade of the color. When thinking of clothing, makeup or accessories, visualize Cool as a color with a drop of silvery-blue. Visualize Warm as a color with a drop of gold. For example, if you put a drop of gold to a red sweater it becomes a Warm red, but if you put a drop of silvery blue it becomes a Cool red.
Miniature paintings are executed on a very small scale on perishable material such as paper and cloth. The Palas of Bengal were the pioneers of miniature painting in India. The art of miniature painting reached its glory during the Mughal period. The tradition of miniature paintings was carried forward by the painters of different Rajasthani schools of painting like the Bundi, Kishangarh, Jaipur, Marwar and Mewar. The Ragamala paintings also belong to this school.
If you are an Autumn (Deep and Warm), your colors are as crisp and colorful as October leaves and have orange and gold undertones. Autumn women look amazing in terracotta and rust colors. But should avoid wearing colors in pastel shades such as pink, gray and sage. The best colors, when it comes to accessories are in the shades of gold, bronze, copper, amber, and jade.