Masonry Walls and Ceilings. Interior masonry walls and ceilings above grade may, in general, be painted in much the same manner as plaster surfaces. Here again, it is necessary to allow adequate time for the masonry to dry before applying paint and, in addition, attention should be given to the preparation of the surface. When decorating a wall containing Portland cement (concrete, for example), it is essential to take precautions against the attack of alkali. For this purpose, alkali-resistant primers such as rubber-base paints may be used when oil paints are to follow.
OK, let's get started. Step one...supplies. You need a flat brush, a fan, a small detail brush and a couple of Filberts. A filbert is a rounded edge brush that lets you maneuver the paint easily without going outside the edges. Ultimately buy brushes that you like though, and make them work. Fans allow you to blend, for example. I use fans a lot and it's how I graduate color throughout my images. Everything I paint is by hand....no airbrushing or assistants. I want it to be an expression of me and nobody else. You also need an oil painting medium to mix with the oil paint to make it more fluid, and to speed or slow the drying process. Whichever you prefer. Go to the art store and don't be afraid to ask for help....they'll love helping you! A medium is merely an additive liquid which increases gloss, makes it flow easily, preserves the finish over time, keeps it from yellowing. I personally love Galkyd and Galkyd Lite. If that isn't available, buy a medium that looks like liquid amber and is kind of thick. Don't buy watery looking mediums....too hard to work with.
You'll need a large compressor, not just the typical 20 gallon variety most of us have. This is a 60 gallon, vertical compressor with typically a 5+ hp motor. Then you'll need a decent paint gun (possibly 2; one for primer and one for color) which again is an expense. Then there's the question of where you'll paint the car. Renting a paint booth is best, but can be expensive and hard to find. You can always seal up your garage or shoot out in the wetted down driveway, but you'll inevitably get dirt and moisture into the paint.
Remove side view mirrors (unless they're to be body color) as well as exterior door handles and locks. This will take some extra time because you need to remove the interior door panels to get these off, but it's worth it. Head lights, tail lights, marker lights and license plates should come off too, but you'll need them in place to drive to the paint shop. So bring some tools so you can quickly take these off once you arrive. Depending on the year Mustang you can just take off the chrome bezels or rings. The shop can then easily mask the headlight or tail light itself and still get plenty of paint around the edges.
Today, it is increasingly easy to source ecologically sound paints, as most specialist ranges, such as Ecos, Earthborn, Georgina Barrow and Auro are available via mail order. There is a wealth of colour options in these pre-mixed ranges that include lush shades and muted palettes, reflecting their natural ingredients. Ecos continues to lead the field. It has recently developed Atmosphere Purifying Paint, which absorbs and neutralises volatile chemicals, solvents and VOCs from the atmosphere in a home.
Take your time there is no rush. There is nothing wrong with having your project take a couple of weeks.
Color - The paint makers are out to sell the lady of the house and color is their come-on. They are tempting her with a kaleidoscope's variety; one firm offers more than 6,000 different shades.