Masonry Walls and Ceilings. Interior masonry walls and ceilings above grade may, in general, be painted in much the same manner as plaster surfaces. Here again, it is necessary to allow adequate time for the masonry to dry before applying paint and, in addition, attention should be given to the preparation of the surface. When decorating a wall containing Portland cement (concrete, for example), it is essential to take precautions against the attack of alkali. For this purpose, alkali-resistant primers such as rubber-base paints may be used when oil paints are to follow.
If you want to balance color all around your current design, you need to have a comprehensive grasp on your existing color scheme. Next, determine the number of accessories required to make balance. Assume that your bedroom is using a split complementary color scheme. Olive green walls are a key part of this color scheme. You have located the primary complementary tone. As you ponder the components of your room, you will notice that the rust-red carpet offers a complementary color. The rug is a couple of shades darker than the shams and bedspread. Balancing a color palette with mauve can be done by using the color in throw pillows. Add unique wall plaques on the wall that include mauve elements along with the other colors. A mauve matte is an appropriate complement for a collection of watercolors. Selecting mauve in the lamp shades gives a great way to incorporate them into this bedroom. You can use a solitary element in your room's design to connect all of your items to each other like a window treatment.
Once the drywall compound/spackle has had sufficient time to dry, you will need to lightly sand the surface of the repair to smooth out any ridges that may have been caused while "coating" the patch. Once you have the surface sanded smooth, take a wet sponge or cloth and, by lightly washing/rubbing, blend the outside edge of the drywall compound/spackle back into the wall. For a smaller repair, you can wash away the excess drywall compound, leaving only the compound/spackle only in the area where the indent was filled. For a larger hole, after filling, sanding and using a wet sponge to blend the outside edge of the compound back into the wall, it may be necessary to texture the area in order to give the smooth patch the appearance of the existing wall.
Is some color dominating?
Better still, you don't have to spend hours getting ready and hours cleaning up afterward. Premixed paints, electric-drill attachments and self-dispensing calking guns make short work of preparation. Cleaning up is a soap-and-water job for the rubber paints, or a quick dip in special cleaners for the oils. Disposable dropcloths and paper paint pails are used once and thrown away.
Try before you buy Colour cards are fine for making an initial selection but you will want to see a true paint sample in situ before committing. Tester pots vary in price from £1 to £4. Paint onto a sheet of paper that you can move around the room to enable you to see the colour in different light conditions. The effect varies greatly. The window wall can seem dark while the wall opposite will be flooded with light. And of course there is a dramatic difference between natural and artificial light. Finally paint a patch directly onto the wall to gauge the colour, coverage and the final finish.
Paint Selection. Most paints are purchased ready-mixed but, in their selection, consideration should be given to the fact that surfaces vary in their adaptability to paint and atmospheric or other conditions having an adverse effect on paint performance. In addition to the normal weathering action of sun and rain, outside house paints are sometimes exposed to other attacking elements, such as corrosive fumes from factories or excessive amounts of wind-driven dust.