Hiding power comes from the paint's pigment and is affected by the manner and thickness of the application. Color retention is the ability to maintain its original color during exposure to sunlight, etc. Chalking resistance prevents the white chalky powder from forming on the surface and lightening the color of the paint. Chalking occur over a period of time. Blister resistance keeps excessive moisture from coming through the substrate and affecting the paint layer. Tip: if paint is applied over a damp or wet surface, blistering is imminent.
Reading also needs good visual perceptual skills. Shape perception allows us to recognise the similarities and differences in the shape of letters. Figure-ground perception is needed to be able to see the separate words on the page and the separate letters in the words. Spatial perception allows us to see where one word starts and another ends and which way round a letter must face.
Primitivist (naive) artists depicted objects in a solid monumental manner, as seen by a child who perceives the world as a whole, without analyzing it and breaking into unnecessary components.
"Boxing" is a good method of mixing paints. Since paint is a mixture of solids and liquids, it is important that it be mixed thoroughly before using. To do this, the greater portion of the liquid contents of the can should be poured in a clean bucket somewhat larger than the paint can. Then, with a stiff paddle, the settled pigment in the original container should be loosened and any lumps broken up. After this, mix the material in the container thoroughly, using a figure 8 motion, and follow with a lifting and beating motion. Continue stirring the mixture vigorously while slowly adding the liquid that was previously poured off the top. Complete the mixing by pouring the paint back and forth from one container to the other several times until the entire amount is of uniform consistency.
Is some color dominating?
A flat, semi-gloss, or high-gloss finish may be applied to the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coat. For a semi-gloss finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss finish, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat.
Another satisfactory whitewash can be made by diluting a moderately heavy cold lime paste (about 33 lbs. of hydrated lime and 8 gallons of water) with 5 gallons of skim-milk.