If rubber-base paint has been used, the caustic soda treatment may not be effective and it may be necessary to use an organic solvent type of paint remover. Caution: - When using caustic soda or lye, avoid splashing eyes, skin, and clothing. Paying for a Brand Name Paint Color? If you are worried about ending up with an ugly paint color, you may be somewhat safer utilizing one of these designer collections. However, the color range offered by any one of these alternative brands is very limited and typically the whole line of hues is all neutralized to about the same tone. This gives the smaller brand a nice consistent look, but it doesn't allow for much variety. Also, these signature paints are typically more expensive (often 50% more) despite the fact that you can get very similar colors from the primary "mother" brand for considerably less money. Remove side view mirrors (unless they're to be body color) as well as exterior door handles and locks. This will take some extra time because you need to remove the interior door panels to get these off, but it's worth it. Head lights, tail lights, marker lights and license plates should come off too, but you'll need them in place to drive to the paint shop. So bring some tools so you can quickly take these off once you arrive. Depending on the year Mustang you can just take off the chrome bezels or rings. The shop can then easily mask the headlight or tail light itself and still get plenty of paint around the edges.
Red color belongs to the three main colors (together with blue and yellow). This color has a lot of shades from light pink to reddish brown. Red is an ideal irritant, there is a reason it is used in corrida to irritate the fighting bulls. Intensity refers to a colors brightness or saturation. Intensity refers to how pure a color is. For instance, if you were to use cadmium red straight from the tube, it would have a high intensity. If you were to mix it with another color however, its intensity would be diminished. Now that you have primed the airless, make sure that there isn't a tip in the gun of the airless and bring it over to the empty bucket. Since there is typically cleaning solution in the hose leading to the gun it is a good idea to spray that out until you see thick paint coming out. Once you have thick paint coming out you may put your tip back in. Remember that the tip will have an arrow on one side of the handle that shows which direction it must be in, in order to spray. Gloss - These paints have a high sheen level and are usually used on woodwork.