Hiding power comes from the paint's pigment and is affected by the manner and thickness of the application. Color retention is the ability to maintain its original color during exposure to sunlight, etc. Chalking resistance prevents the white chalky powder from forming on the surface and lightening the color of the paint. Chalking occur over a period of time. Blister resistance keeps excessive moisture from coming through the substrate and affecting the paint layer. Tip: if paint is applied over a damp or wet surface, blistering is imminent. Paints in powdered form require the addition of a liquid to prepare them for use. The manufacturer's directions as to the amount of oil, varnish, water, or other vehicle required should be followed. Miniature paintings are one of the many things that make an Indian proud of his country's rich cultural heritage. Miniature paintings originated long back in the history of India. Indian Paintings can be broadly classified as the murals and miniatures. Murals are huge works executed on the walls of solid structures, as in the Ajanta Caves and the Kailashnath temple.
Semi-gloss paints are very similar to gloss plaints except it has lesser sheen. Semi-gloss is also suitable for rooms with high humidity (best used for children's room) and can be used for trim works and casings. These paints ensure maximum durability. Again, as with Warm and Cool, hair is the most important characteristic in determining Light or Deep. Women with Light coloring tend to have blond, light brown, or light red hair. Women with Deep coloring tend to have brunette, dark red, or black hair. Use Tinted Primer for Dark Paint Colors.In our second case, suppose you want to apply a deep, dark blue to a beige wall. The good news is that it will be easier to darken a light color than it was to lighten a dark color. In fact, it may only take 2 - 4 coats to get total color coverage in this scenario. The bad news is that if you start out with a white primer you are already moving in the wrong direction. Doing so could increase the number of paint coats you need to 3 - 6... plus the coat of primer! That's a lot of painting! A flat, semi-gloss, or high-gloss finish may be applied to the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coat. For a semi-gloss finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss finish, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat.