Coloring bratz pages

Published at Friday, 27 March 2020.

Building a monochromatic theme simply uses a single color in graduating shades like cream, beige and brown. It is hard to go wrong with this color palette, so everyone can use it successfully. But unless variations of the one color used are handled with flair, this can be an unexciting look. Cold water paints of the casein type may be applied either directly to a plastered surface, or the surface may be first given a coat of primer-sealer to equalize uneven suction effects. The same is true of resin-emulsion paints, with the recommendations of the manufacturer of the product being given preference in case of doubt. Since resin-emulsion paints usually contain some oil in the binder, they should ordinarily be applied only to plaster which has dried thoroughly. Cement-water paints are best suited for application to basement walls which are damp as a result of leakage or condensation. To apply these paints, the same procedure should be followed as is described here for painting exterior masonry walls.

Specialist paints also include some exciting new finishes, such as suede effects, metallics and high-sheen lacquers. Judy Smith, colour consultant at Crown, suggests an accent wall in one of these to lift a neutral scheme. Crown's Feature Wall range, which includes eight metallic finishes, nine bright colours and a highly reflective Pure Brilliant White, comes in convenient 1.25 litre tins. Masonry paints come in a wide variety of finishes, from textured to ultra-smooth. Opt for a texture if you need to disguise fine surface cracks. If you favour traditional finishes, then consider limewash, which is available from specialists such as Francesca's Lime Wash. The beauty of this paint is that it will mellow and weather with time. However, do check with the supplier first to ensure that the surface is suitable for this finish. A large whitewash brush is best for applying the wash. One should not attempt to brush out the coating, as in applying oil paint, but simply spread the whitewash on as evenly and quickly as possible. Use Plain White Primer for Light Paint Colors. In our first case, if you decide to paint a wall in your house with a light yellow color, but the wall is currently a deep dark brown, you will go through bucket after bucket of paint trying to cover that brown, easily doing 4 - 6 coats or more. But if you put down a coat of white primer first, you could be done after 2 coats of paint.