Now let's proceed to analyzing the center of the composition. There is an optical center in the middle - you will notice that the center of the composition, the major element will never be placed there, otherwise the scene will look artificial. The center of the composition will always be the most striking element, and the rest will just serve to make it more expressive. The artist may use various means to achieve this effect - the color contrasts, light and shade effects, size of objects and distance between them. Secondary elements are depicted with less detail and vigor - they have to bring forward the center, not block it. Notice the way your eyes travel the painting - intuitively you will start at the center and will proceed to the rest of the elements to refine the story.
If you decide to do your own body work discuss it with the paint shop first. They'll probably have recommendations on the type of primer you use. Some brands will be more compatible with their primers or color coats. The rule of thumb is to stay within the same brand of paint, both for prep and color. Even the cheapest paint shops typically use a brand name on their intermediate and higher paint jobs. Find out what it is and use the same brand as your primer coat. This will ensure you don't create adhesion problems for yourself down the road.
Fortunately, you can always get your primer tinted for free. Getting your primer colored the same as your paint will save you a coat of paint. Of course, I always recommend doing a minimum of 2 coats of paint so that your finish sheen looks consistent.
It's funny, but many of the colors that a paint company puts in its line would never look good painted on any wall. The colors are 100% used to grab your attention when you are perusing paint displays. People are helplessly attracted to bright colors; they are much more eye-catching and far more interesting to our brains.
Once you figure out which position is prime and which position is spray, place the valve in the prime position and grab the primer hose. Point the primer hose in the empty bucket near the top and at an aproxx.45 degree angle from the side (the reason for this is that there is likely to be pressure still built up in the airless and when you first switch on the airless to prime it, paint will likely burst out of the primer hose and you don't want to have it go everywhere). Now turn the airless paint sprayer on and you will see that the airless is sucking up the new paint and pumping out the primer hose. At first you will typically see a cleaning solution come out followed by your paint. When you see your paint coming out switch over the primer valve to the other position and you will see the airless pumping paint into the main hose.
A large whitewash brush is best for applying the wash. One should not attempt to brush out the coating, as in applying oil paint, but simply spread the whitewash on as evenly and quickly as possible.
Most homes exterior trim is painted on the front only, more commonly called front-facing the trim. Sides of trim is normally painted with main body color. Few homes have trim painted on all 3 visible surfaces, called in the painting industry as 3-D'ed painting.