When spraying your house, it is a good rule of thumb to spray in the direction of the grain of the material. So if you have siding that runs horizontal, you want to spray in a horizontal style. Also, when you go to spray, the gun should be approximately 12" from the material that you are spraying. Do not pull the handle to spray with your hand still. This will spray a lot of paint in one spot causing it to drip. So have your hand moving when you go to depress the handle. This will give you an even look to your paint. The term paint is used to include paints, varnishes, enamels, shellacs, lacquers, and stains. • Paints are composed of mineral pigments, organic vehicles, and a variety of thinners all combined. • Varnishes are resins dissolved in organic thinners. • Enamels are pigmented varnishes. • Shellac is lac gum dissolved in alcohol. • Lacquers may be both pigmented or clear - the liquid portion usually is treated nitrocellulose dissolve in thinners. • Stains may be pigmented oil or a penetrating type. Many of these materials, such as paints, varnishes, and lacquers, are formulated for specific purposes: • Outside house paints and exterior varnishes are intended to give good service when exposed to weathering • Interior wall paints are formulated to give excellent coverage and good wash-ability. • Floor enamels are made to withstand abrasion. • Lacquers are formulated for rapid drying. • There are also formulas which provide extra self-cleaning, fume- resisting, waterproofing, hardening, flexibility, mildew-resisting, resistance to fading, and breathing qualities. Semi-gloss paints are very similar to gloss plaints except it has lesser sheen. Semi-gloss is also suitable for rooms with high humidity (best used for children's room) and can be used for trim works and casings. These paints ensure maximum durability.
Plaster. New dry plaster in good condition, which is to be finished with a paint other than water paint, should be given a coat of primer-sealer and allowed to dry thoroughly before being inspected for uniformity of appearance. Variations in gloss and color differences in the case of tinted primers indicate whether or not the whole surface has been completely sealed. If not, a second coat of primer-sealer should be applied. If only a few "suction spots" are apparent, a second coat over these areas may be sufficient. Now, decide WHAT you want to paint. Very important...you do NOT need to know how to draw. That's the great thing about painting, you can create even if you've never had a lesson. Don't get me wrong, art school is great. But don't let the lack thereof deter you from creating. You do not have to have a teacher to tell you how to create. You do need to know a few basic techniques, but from there let your imagination fly! When deciding what to paint, go to some websites about artists or Google famous artists to get inspired. Again, do not let a lack of training deter you from painting! Many of the great artists of the past had no training either. Many can't draw stick figures, but they can paint because the colors give you amazing options of expression! You may also go to my websites mentioned below or Google me to see all the crazy work I've created. My personal preference has been to create a large variety of work to keep it interesting and versatile. I did not want to be that artist who only painted one thing over and over. To me that's boring, and it should be boring to you too. Any known artist of the past has a vast variety of work. You'll also find that it makes it more interesting to you while you're doing it, because you won't ever get bored, you'll always be wondering how it'll turn out. Even if you don't need to apply a coat of primer before your new coats of paint, doing so will always save you money. Whether you use white or tinted primer, a coat of primer is always more cost effective for one simple reason: It is cheaper! In fact, primer may cost as little as half as much as standard paint. If you get it tinted the same as your paint, then it is cheaper by the coat. If you use white, as in the first scenario above, it will also minimize the number of coats of paint you have to apply. Either way it reduces how much paint you have to buy. Do you want to learn more about maximizing your paint color coverage, minimizing your paint usage, optimizing coats, and perfecting your primer? Knock down texture is basically a orange peel that is sprayed on and allowed to "set-up" for a minute or two then gently "knocked down" by running a 6" drywall knife over it, "knocking down" the surface of the texture. Although knock down is a flattened version of orange peel, I suggest you do not use a spray can of orange peel, the knock down comes in its own spray can and the results are much better, again experiment before spraying it on the wall. However, If ever you apply any of the textures to the wall and are not satisfied with the results, wash the texture off immediately before it dries, then allow the wall to dry and try it again. Once you have the texture applied to your liking and you have allowed it to dry, you may want to paint the patches a couple of time before painting the entire wall, especially for walls where the paint to be applied will have some sheen. Multiple coats on these areas will make them blend in, unnoticeable, with the rest of the wall. You will know if the patches need more coats of paint, because the patch/texture will have absorbed the paint causing the spot to look duller than the rest of the existing wall.