Complementary colors are opposites, and if you look at a color wheel, they are directly across from each other. While complementary ones may seem kind of mysterious to a novice, you just have to bring to mind Christmas to find a great example that is familiar to everyone, red and green.By simply making these colors a little paler, you can make this color palette work really well. Color tones are important, because rust and moss, while still being red and green, do not scream 'Christmas'. If your choice of tones is bold, you will create an eye popping design. However, it is common to get off course.
Again, as with Warm and Cool, hair is the most important characteristic in determining Light or Deep. Women with Light coloring tend to have blond, light brown, or light red hair. Women with Deep coloring tend to have brunette, dark red, or black hair.
Always use a sanding block for flat surfaces. Just your hand behind a thin piece of sand paper can leave grooves and low spots. It's also easier on your hands. For inside curves try wrapping the sand paper around a short section of garden or heater hose. This will help approximate the concave curve and help stay away from sanding through hard edges. On hard edges, like the top ridge of a fender or leading edge of a hood, you need to do this by hand. A sanding block will quickly dig right through the paint on a hard edge and take you down to bare metal. This means primer and more sanding.
Can you feel the rhythm in repeating some color or combination?
For localities where such conditions exist, self-cleaning paints should be selected. These paints are usually so designated on the label. Concrete, plaster, and metal surfaces each present special problems in painting. For instance, paint for use on masonry or new plaster must be resistant to dampness and alkalies, and paints used on steel must have rust-inhibitive properties.
Mixing. Paste paints, such as aluminum, resin-emulsion, and lead-in-oil, should be stirred with a stiff paddle and reduced to painting consistency with the liquids recommended on the manufacturer's labels.
However, if you put a coat of pure white primer (which has a score of 0) on top of the brown color wall first, this immediately brings your luminosity score down to 4 (8 + 0 = 8/2 = 4, the average). This means you may only need one coat of yellow paint to give you the right hue and saturation. In reality of course, you will always want to do at least 2 coats. But even with a total of 3 coats (primer and paint) you are way ahead of the paint-only option.